Effect of EVOH on the morphology,mechanical and barrier properties of PA6/POE-g-MAH/EVOH ternary blends |
| |
Affiliation: | 1. Polymers and Advanced Materials Group (PIMA), Universidad Jaume I, 12071 Castellón, Spain;2. Novel Materials and Nanotechnology, IATA-CSIC, Aptdo. Correos 73, 46100 Burjassot, Spain;3. Instituto de Tecnología de Materiales, Universidad Politécnica de Valencia (UPV), Camino de Vera s/n, 46022 Valencia, Spain;1. Sartorius Stedim FMT S.A.S, Z.I. Les Paluds, Avenue de Jouques CS91051, Aubagne CEDEX 13781, France;2. Aix Marseille Univ, Avignon Université, CNRS, IRD, IMBE, Marseille, France;3. Aix Marseille Univ, CNRS, ICR, Case 551, Marseille 13397, France |
| |
Abstract: | Polyamide 6 (PA6)/maleated poly(ethylene-1-octene) (POE-g-MAH) blends with various ethylene–vinyl alcohol (EVOH) concentrations were prepared via melt-blending. The morphology, mechanical and barrier properties of the blends were investigated in terms of scanning electron microscope (SEM), impact/tensile testing, dynamic mechanical analysis (DMA) and oil absorption rate. The SEM images indicated that the compatibility between PA6 and POE-g-MAH was improved significantly after the incorporation of EVOH. The toughness of blends was correlated with the morphology of the POE-g-MAH and EVOH dispersion phase. It has also demonstrated that the incorporation of EVOH increased evidently the tensile strength, storage modulus and barrier properties, which were contributed to the strong interactions formed through the reaction among PA 6, POE-g-MAH and EVOH. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|