| 聚砜类原位复合材料加工流变性 |
| |
| 引用本文： | 施建良,陈建定.聚砜类原位复合材料加工流变性[J].复合材料学报,1994,11(3):1-6. |
| |
| 作者姓名： | 施建良 陈建定 |
| |
| 作者单位： | 华东化工学院材料科学研究所 |
| |
| 基金项目： | 国家自然科学基金和上海市科委启明星计划基金资助项目 |
| |
| 摘 要： | 合成了含4,4'-二羟基联苯和4,4'-二羟基二苯基甲烷结构的两种液晶共聚酯BP-LCP和BPM-LCP,将其与聚砜共混制备原位复合材料。探讨了共混物在Haake转矩流变仪中密炼时转矩的变化;通过毛细管挤出考察了液晶共聚酯分子结构、分子量及含量变化对原位复合材料流变性能的影响,由流动曲线获得这一类原位复合材料熔体大部分表现为假塑料性非牛顿型流体,但含低分子量BP-LCP20%和BPM-LCP30%的两种原位复合熔体均表现出特殊的流变性:较低剪切速率时为胀塑性流体,较高剪切速率时为假塑性流体。分析了这种现象与液晶共聚酯结构形态的关系。并讨论了增强组份和基体的相容性对原位复合材料流变性的影响。
|
| 关 键 词： | 原位复合 液晶共聚酯 流变性 聚砜 相容性 |
| 收稿时间： | 1992-11-09 |
RHEOLOGY IN PROCESSING OF IN-SITU COMPOSITES OF POLYSULFONE |
| |
| Shi Jianliang, Chen jianding, Li Dafen WuXuqin.RHEOLOGY IN PROCESSING OF IN-SITU COMPOSITES OF POLYSULFONE[J].Acta Materiae Compositae Sinica,1994,11(3):1-6. |
| |
| Authors: | Shi Jianliang Chen jianding Li Dafen WuXuqin |
| |
| Affiliation: | Institute of Materials Science and Engineering, East China University of Chernical Technology, Shanghai 200237 |
| |
| Abstract: | Two kinds of wholly aromatic thermotropic liquid crystalline copolyesters (LCP) based on HO-  - -OH or HO- -CH2- -OH were prepared, then blended with polysulfone for preparing in-situ composites. The variations on torque of blends in melt process have been studied. And effects of chain structure, molecular weight and content of LCP on rheology of in-situ composites have been investigated. It is obtained from the curves of milting flow that the melts of in-sits composites for polysulfone conform to non-Newton's law of viscosity and showed pseudolasticity. The morphology and compatibility of LCP and polysulfone have been also discussed. |
| |
| Keywords: | s in-situ composite liquid crystalline copolyester rheology polysulfone compatibility |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
