首页 | 本学科首页   官方微博 | 高级检索  
     

非线性接触模型在多间隙机构混沌分析中的应用
引用本文:王国庆,刘宏昭,何长安.非线性接触模型在多间隙机构混沌分析中的应用[J].机械科学与技术(西安),2005,24(6):636-638.
作者姓名:王国庆  刘宏昭  何长安
作者单位:[1]西北工业大学,西安710072//长安大学,西安710064 [2]西安理工大学,西安710048 [3]西北工业大学,西安710072
基金项目:国家自然科学基金项目(50075068)资助
摘    要:分析了含间隙运动副副元素的碰撞分离过程,指出线性弹簧阻尼模型不能满足接触边界条件并产生力突变;采用符合接触边界条件的非线性弹簧阻尼模型描述碰撞分离过程,并通过实例分析了模型积分求解方法;建立了多间隙曲柄摇杆机构的动力学模型,对含间隙机构的非线性特性进行了分析和讨论,说明多间隙机构动力学行为中存在混沌现象。

关 键 词:间隙  机构  碰撞  混沌
文章编号:1003-8728(2005)06-0636-03

Application of Nonlinear Contact Model in Chaos Analysis of a Mechanism with Clearance Joints
WANG Guo-qing ,LIU Hong-zhao ,HE Chang-an.Application of Nonlinear Contact Model in Chaos Analysis of a Mechanism with Clearance Joints[J].Mechanical Science and Technology,2005,24(6):636-638.
Authors:WANG Guo-qing    LIU Hong-zhao  HE Chang-an
Affiliation:WANG Guo-qing 1,2,LIU Hong-zhao 3,HE Chang-an 1
Abstract:This paper points out the disagreement of boundary conditions that generate force discontinuity in the linear spring damping contact model by analyzing the contact modulation of the clearance joint.The nonlinear spring damping contact model is adopted to model the contact force of the clearance joint elements by making a comparison among the integration methods. The nonlinear behavior of the mechanism with clearance joints is analyzed based on the dynamic model of the crank rocker mechanism with clearance joints. Finally, according to Poincare map, it is found that clearance is the important fact that causes chaos and affects the figure of Poincare map.
Keywords:Clearance  Mechanism  Contact  Chaos
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号