首页 | 本学科首页   官方微博 | 高级检索  
     

氯化甲基汞在ITO电极上的电化学行为及其降解
引用本文:陈家越,朱庆斌. 氯化甲基汞在ITO电极上的电化学行为及其降解[J]. 广州化工, 2009, 37(8): 102-104
作者姓名:陈家越  朱庆斌
作者单位:福建交通职业技术学院,安全技术与环境工程系,福建,福州,350007;福建交通职业技术学院,安全技术与环境工程系,福建,福州,350007
摘    要:以氯化甲基汞为代表,对其在ITO导电玻璃上的电化学行为及其降解方法进行探讨。研究了在ITO导电玻璃上氯化甲基汞在不同条件下的降解过程。实验考察了不同扫描速率、支持电解液、溶液酸碱性、外加电压、降解时间等影响因素,结果表明在扫描速率为200mV、外加电压为0.6V、降解时间为30min时,降解率最大的。在上述条件下,发现当氯化甲基汞初始浓度在0~280mmol/L内时,氧化峰电流大小与其成线性关系,线性系数为0.9937。

关 键 词:氯化甲基汞  ITO导电玻璃  降解

The Electric Chemical Behavior and Degradation of Methyl-mercuric Chloride at ITO Electrode
CHEN Jia-yue,ZHU Qing-bin. The Electric Chemical Behavior and Degradation of Methyl-mercuric Chloride at ITO Electrode[J]. GuangZhou Chemical Industry and Technology, 2009, 37(8): 102-104
Authors:CHEN Jia-yue  ZHU Qing-bin
Affiliation:Department of Security Technology with Environmental Engineering;Fujian Communication Technology College;Fujian Fuzhou 350007;China
Abstract:The electric effect and degradation of methyl-mercuric chloride on ITO electrode was discussed.The factors influencing the degradation of methyl-mercuric chloride on ITO,such as the scanning rate,the pH value,the applied potential and the degradation time were all investigated.It was found that the degradation rate could reach the maximum when the scanning rate was 200mV/s,the applied potential was 0.6V,and the degradation time was 30mins.The photocurrent was linear with the initial concentration ranging fr...
Keywords:methyl-mercuric chloride  ITO  degradation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号