| 单辊倾斜非对称PC轧机板形控制的技术原理 |
| |
| 引用本文： | 李纬民,刘助柏,倪利勇,龙友松.单辊倾斜非对称PC轧机板形控制的技术原理[J].钢铁研究学报,2002,14(2):13-17. |
| |
| 作者姓名： | 李纬民 刘助柏 倪利勇 龙友松 |
| |
| 作者单位： | 1. 燕山大学机械工程学院,河北,秦皇岛,066004
2. 哈尔滨,锅炉有限责任公司工艺处,黑龙江,哈尔滨,150040 |
| |
| 摘 要： | 对不同轧辊交叉方式的辊缝特性进行了研究。结果表明，虽然单辊不对称交叉方式可以简化PC轧机的结构，减少设备投资，但会使辊缝出现明显的不对称性。为了克服这一弊端，提出了单辊倾斜非对称PC轧制的技术方案，并给出了轧辊和铅垂面内需要倾斜的角度。该方案简单易行，既有单辊非对称交叉设备简便的优点，又可达到对称交叉时的板形控制效果。
|
| 关 键 词： | 交叉轧制 单辊交叉 轧辊倾斜 |
| 文章编号： | 1001-0963(2002)02-0013-05 |
| 修稿时间： | 2001年5月25日 |
Technological Principle on Shape Control by Single Declining Roller in Asymmetrical PC Rolling Mill |
| |
| LI Wei min ,LIU Zhu bai ,NI Li yong ,LONG You song.Technological Principle on Shape Control by Single Declining Roller in Asymmetrical PC Rolling Mill[J].Journal of Iron and Steel Research,2002,14(2):13-17. |
| |
| Authors: | LI Wei min LIU Zhu bai NI Li yong LONG You song |
| |
| Affiliation: | LI Wei min 1,LIU Zhu bai 1,NI Li yong 1,LONG You song 2 |
| |
| Abstract: | The features of roll gap in different cross schemes of roller arrangement were studied. The research result manifested that the single roller asymmetrical cross scheme may simplify the structure of rolling mill and lower investment on machinery, but cause obvious asymmetry of roll gap. To overcome the fault, an improved technological scheme of single declining roller was produced and the necessary declining angle of roller within vertical plane was given. With the merit of simple equipment, which characterizes asymmetrical cross scheme with single roller, and shape control effects of symmetrical cross, this scheme is put into practice easily. |
| |
| Keywords: | cross rolling single roller cross roller declination |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
