| 船用直流接触器电磁铁的优化设计 |
| |
| 引用本文： | 金立军,袁征,庄火庚,王永鑫.船用直流接触器电磁铁的优化设计[J].低压电器,2007(11):6-9. |
| |
| 作者姓名： | 金立军 袁征 庄火庚 王永鑫 |
| |
| 作者单位： | 1. 同济大学,电气工程系,上海,200331
2. 上海电器科学研究所(集团)有限公司,上海,200063 |
| |
| 摘 要： | 以三维有限元分析为基础,采用ANSYS软件,对直流接触器电磁铁进行了优化设计,以满足船用直流接触器耐冲击、抗振动和工作电压范围大的特殊要求.根据双绕组电磁铁的特点,分析了铁芯高度、线圈尺寸和气隙长度对电磁吸力的影响.优化后的直流接触器通过了相关型式试验.
|
| 关 键 词： | 船用 直流接触器 电磁铁 优化设计 |
| 文章编号： | 1001-5531（2007）11-0006-04 |
| 修稿时间： | 2007年1月1日 |
Optimal Design for Marine DC Contactor Electromagnet |
| |
| JIN Lijun,YUAN Zheng,ZHUANG Huogeng,WANG Yongxin.Optimal Design for Marine DC Contactor Electromagnet[J].Low Voltage Apparatus,2007(11):6-9. |
| |
| Authors: | JIN Lijun YUAN Zheng ZHUANG Huogeng WANG Yongxin |
| |
| Affiliation: | 1. Department of Electrical Engineering, Tongji University, Shanghai 200331, China; 2. Shanghai Electrical Apparatus Research Institute (Group |
| |
| Abstract: | Based on the 3D finite element method and using ANSYS software, the optimal design for DC contactor electromagnet was completed which adapts the special demands of anti-shock, anti-vibration, working in a wide range voltage for marine DC contactor. According to the characteristics of double-winding electromagnet, the influence of the height of magnet, dimension of coin and length of air gap were analyzed. After the optimization, this DC contactor has been passed by type test. |
| |
| Keywords: | marine DC contactor electromagnet optimal design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
