首页 | 本学科首页   官方微博 | 高级检索  
     

PA6/纳米Al_2O_3复合材料摩擦性能的研究
引用本文:孙义明,肖安国,郦华兴,孟庆浩.PA6/纳米Al_2O_3复合材料摩擦性能的研究[J].塑料科技,2004(2):33-35.
作者姓名:孙义明  肖安国  郦华兴  孟庆浩
作者单位:湖北工学院化工系,湖北,武汉,430068
摘    要:研究了纳米Al2 O3 填充PA6复合材料的摩擦性能。通过分析纳米Al2 O3 含量、载荷对材料摩擦系数和耐磨性能的影响,得到复合材料中纳米Al2 O3 为 6wt%时,材料的摩擦性能最好。通过SEM图片分析试件摩擦表面形貌,发现复合材料的磨损机理从纯PA6材料的粘着磨损转为轻微的磨粒磨损和粘着磨损

关 键 词:纳米Al_2O_3  PA6  摩擦性能  磨损机理
文章编号:1005-3360(2004)-02-0033-04
修稿时间:2003年12月11

Friction and Wear Properties of PA6/nano Al2O3 Composites
SUN Yi-ming,XIAO An-guo,LI Hua-xing,MENG Qing-hao.Friction and Wear Properties of PA6/nano Al2O3 Composites[J].Plastics Science and Technology,2004(2):33-35.
Authors:SUN Yi-ming  XIAO An-guo  LI Hua-xing  MENG Qing-hao
Abstract:It analyzed the influences of different content of nano-Al 2O 3 and loads on the friction coefficient and abrasive resistance of compositesAs a result,the friction and wear properties of PA composites filled with 6wt% nano-Al 2O 3 were the bestIt was found that the abrasion mechanism of pure PA6 was adhesive wear but those of PA composites of PA composites were bofh abrasive grain wear and adhesive wear
Keywords:PA6  Al  2O  3  Friction and wear properties  Abrasion mechanism
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号