| 高强度7475Al合金超塑变形空洞形状变化的分形描述 |
| |
| 引用本文： | 蒋兴钢,崔建忠,马龙翔. 高强度7475Al合金超塑变形空洞形状变化的分形描述[J]. 金属学报, 1990, 26(4): 144-147 |
| |
| 作者姓名： | 蒋兴钢 崔建忠 马龙翔 |
| |
| 作者单位： | 东北工学院加工系，东北工学院，东北工学院 沈阳110006 |
| |
| 摘 要： | 本文测量了7475高强Al合金超塑变形时,不同应变、不同温度、不同应变速率、不同晶粒尺寸时空洞分形维数的变化。由此得出:空洞的分形维数随应变的增加而增加,在低的变形温度。高的应变速率及粗的晶粒尺寸条件下对应空洞的分形维数较高。空洞的分形维数越高,则材料越接近于破断。
|
| 关 键 词： | 超塑变形 空洞 分形 Al合金 |
| 收稿时间： | 1990-04-18 |
| 修稿时间： | 1990-04-18 |
FRACTAL DIMENSION OF CAVITIES SHAPE CHANGES DURING SUPERPLASTIC DEFORMATION OF HIGH STRENGTH Al ALLOY 7475 |
| |
| JIANG Xinggang,CUI Jianzhoug,MA Longxiang Northeast University of Technology,Shenyang Box,Northeast University of Technology,Shenyang. FRACTAL DIMENSION OF CAVITIES SHAPE CHANGES DURING SUPERPLASTIC DEFORMATION OF HIGH STRENGTH Al ALLOY 7475[J]. Acta Metallurgica Sinica, 1990, 26(4): 144-147 |
| |
| Authors: | JIANG Xinggang CUI Jianzhoug MA Longxiang Northeast University of Technology Shenyang Box Northeast University of Technology Shenyang |
| |
| Abstract: | The fractal dimension changes of cavities have been determined duringsuperplastic deformation of the high strength Al alloy 7475 with different strain,temperature, strain rate and grain size. The fractal dimension of cavities may in-crease with the increase of strain. It becomes higher as the alloy deformed underthe lower temperature, the greater strain rate and the coarser grain size. The alloywould be approaching to rupture if the fractal dimension of cavities raised to acertain extent. |
| |
| Keywords: | fractal dimension superplastic deformation cavity Al alloy |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金属学报》浏览原始摘要信息 |
|
点击此处可从《金属学报》下载全文 |
