首页 | 本学科首页   官方微博 | 高级检索  
     

基于QCA可编程逻辑阵列单元的元胞缺陷研究
引用本文:李政操,蔡理,黄宏图.基于QCA可编程逻辑阵列单元的元胞缺陷研究[J].微纳电子技术,2012,49(4):222-227.
作者姓名:李政操  蔡理  黄宏图
作者单位:空军工程大学理学院,西安,710051
基金项目:国家自然科学基金资助项目(61172043);陕西省自然科学研究计划重点资助项目(2011JZ015)
摘    要:介绍了一种量子元胞自动机(QCA)可编程逻辑阵列结构,该结构可用于实现量子元胞自动机大规模可编程逻辑电路,采用QCADesigner仿真软件研究了元胞缺失、移位缺陷和未对准缺陷对可编程逻辑阵列单元逻辑功能的影响。得出了特定结构下,每个元胞移位缺陷和未对准缺陷的最大错位距离,以及导线模式中存在特定位置的8个可缺失元胞。这为缺陷单元的应用提供了一个具体的参数标准,提高了PLA阵列的单元利用率。

关 键 词:量子元胞自动机(QCA)  可编程逻辑阵列(PLA)  元胞缺失  移位缺陷  未对准缺陷

Study of Cell Defects of the Programmable Logic Array Unit Based on the Quantum-Dot Cellular Automata
Li Zhengcao , Cai Li , Huang Hongtu.Study of Cell Defects of the Programmable Logic Array Unit Based on the Quantum-Dot Cellular Automata[J].Micronanoelectronic Technology,2012,49(4):222-227.
Authors:Li Zhengcao  Cai Li  Huang Hongtu
Affiliation:(College of Science,Air Force Engineering University,Xi’an 710051,China)
Abstract:A programmable logic array(PLA) structure that can be used in the large scale integrated circuit using quantum-dot cellular automata(QCA) was introduced.The effects of the cell omission,cell misalignment and cell displacement on the PLA were researched by QCADesigner.And the maximum fault-tolerant ranges of displacement and misalignment for each cell were obtained for a certain structure.Besides that,the 8-cell omission defect in the wire mode was also achieved.The research provides a concrete parameter criterion for applying defect units normally,and advances the utilizing rate of the cell.
Keywords:quantum-dot cellular automata(QCA)  programmable logic array(PLA)  missing cell  displacement defect  misalignment defect
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号