| 基于MATLAB/Simulink的开关磁阻电动机调速系统的建模与仿真 |
| |
| 引用本文： | 王巧花,叶平.基于MATLAB/Simulink的开关磁阻电动机调速系统的建模与仿真[J].煤矿机械,2006,27(1):29-31. |
| |
| 作者姓名： | 王巧花 叶平 |
| |
| 作者单位： | 中国矿业大学,机电工程学院,江苏,徐州,221008 |
| |
| 摘 要： | 介绍了开关磁阻电动机的准线性数学模型,使用MATLAB/Simulink建立了仿真模块库,其中包括电流计算、转子位移角计算、电磁转矩计算等模块,然后将这些模块有机结合搭建了开关磁阻电动机调速系统仿真模型,该模型低速阶段采用电流斩波控制方式,高速阶段采用角度位置控制方式。
|
| 关 键 词： | 开关磁阻电动机 MATLAB/Simulink 模型 仿真 |
| 文章编号： | 1003-0794（2006）01-0029-03 |
| 收稿时间： | 2005-10-13 |
| 修稿时间： | 2005-10-13 |
Modeling and Simulation of Switched Reluctance Drive Based on MATLAB/Simulink |
| |
| WANG Qiao-hua,YE Ping.Modeling and Simulation of Switched Reluctance Drive Based on MATLAB/Simulink[J].Coal Mine Machinery,2006,27(1):29-31. |
| |
| Authors: | WANG Qiao-hua YE Ping |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221008, China |
| |
| Abstract: | Under MATLAB/Simulink environment,the simulation block library was firstly established,based on the approximate nonlinear mathematics model of switched reluctance motor(SRM).This block library included the current calculating block,the motor angle calculating block,the torque calculating block,etc.Then,by the combination of these blocks,a simulation model of switched reluctance driver(SRD) was established easily,adopting Chopped Current Control(CCC) during lower speed and adopting Angular Position Control(APC) during higher speed. |
| |
| Keywords: | MATLAB/Simulink |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
