| 不锈钢薄壁波纹换热管强度的有限元分析 |
| |
| 引用本文： | 刘洁,张和平.不锈钢薄壁波纹换热管强度的有限元分析[J].淮海工学院学报,2005,14(1):18-20. |
| |
| 作者姓名： | 刘洁 张和平 |
| |
| 作者单位： | 淮海工学院机械工程系 江苏连云港222005
(刘洁)，淮海工学院机械工程系 江苏连云港222005(张和平) |
| |
| 摘 要： | 应用ANSYS有限元程序，选取空间壳体单元SHELL63，在相同内压下，对换热器设计中常用的两种不锈钢薄壁波纹管进行强度分析，得出二者一个周期内的径向应力、轴向应力和剪切应力的分布规律。有限元计算值与参考文献实验结论比较，表明计算值与实验值关于一个周期内轴向和径向应力的分布规律相同，有限元(ANSYS)计算结果可供波纹管设计、制造参考。
|
| 关 键 词： | 波纹管 ANSYS有限元 强度 |
| 文章编号： | 1672-6685(2005)01-0018-03 |
| 修稿时间： | 2004年7月30日 |
A Strength Analysis of Stainless-steel Corrugated Tubes by Finite Element Method |
| |
| LIU Jie,ZHANG He-ping.A Strength Analysis of Stainless-steel Corrugated Tubes by Finite Element Method[J].Journal of Huaihai Institute of Technology:Natural Sciences Edition,2005,14(1):18-20. |
| |
| Authors: | LIU Jie ZHANG He-ping |
| |
| Abstract: | An analysis is made to the strength of corrugated tubes made of stainless steel and widely used in heat exchanger using ANSYS and SHELL63 at the same inside pressure. The distribution of different stresses is obtained. It is found that the stress distribution of ANSYS calculated results is the same as that of experiments in a period, which is helpful for the designing and manufacturing of corrugated tubes. |
| |
| Keywords: | corrugated tube ANSYS finite element strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
