| 中厚板探伤不合的原因分析与解决措施 |
| |
| 引用本文： | 田世永,郑香增,刘熙章.中厚板探伤不合的原因分析与解决措施[J].宽厚板,2010,16(5):31-34. |
| |
| 作者姓名： | 田世永 郑香增 刘熙章 |
| |
| 作者单位： | 济钢集团有限公司 |
| |
| 摘 要： | 采用金相、电子探针等手段,对Q345C探伤不合的原因进行了分析。结果表明:中心偏析、内部裂纹和夹杂物是造成探伤不合的主要原因。通过采取针对性的冶炼及轧制工艺改进措施,有效提高了探伤合格率。
|
| 关 键 词： | 探伤 偏析 夹杂 裂纹 |
The Cause Analysis and Countermeasures of Disqualification in Flaw Detection of Medium Plate |
| |
| Tian Shiyong,Zheng Xiangzeng,Liu Xizhang.The Cause Analysis and Countermeasures of Disqualification in Flaw Detection of Medium Plate[J].Wide and Heavy Plate,2010,16(5):31-34. |
| |
| Authors: | Tian Shiyong Zheng Xiangzeng Liu Xizhang |
| |
| Affiliation: | (Jinan Iron and Steel Group Corporation) |
| |
| Abstract: | The article briefly analyses the factors of disqualification in flaw detection of Q345C steel plate by means of metallographic examination and electron microprobe. The results show that the center segregation, internal crack and inclusions are the major causes of disqualification in flaw detection. The qualification rate of flaw detection is effectively improved by taking improvement measures of melting and rolling process. |
| |
| Keywords: | Flaw detection Segregation Inclusion Crack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
