首页 | 本学科首页   官方微博 | 高级检索  
     

基于ADAMS的装载机多体动力学研究
引用本文:李耀辉,孙仲超,陈斌,张传伟,李建华. 基于ADAMS的装载机多体动力学研究[J]. 煤矿机械, 2006, 27(10): 81-83
作者姓名:李耀辉  孙仲超  陈斌  张传伟  李建华
作者单位:陕西蒲白三通有限公司,陕西,蒲城,715517;西安科技大学,机械工程学院,西安,710054
摘    要:采用虚拟样机设计技术建立装载机模型,考虑到轮胎与工作机构的相互影响,对装载机的上坡过程进行纵向稳定性分析,模拟不同的坡度下装载机的上坡能力,得出最大坡度时装载机可能出现的运动现象,并对此做出了分析,结果表明与物理样机实测情况基本一致。

关 键 词:多体系统动力学  装载机  虚拟试验  ADAMS
文章编号:1003-0794(2006)10-0081-03
收稿时间:2006-05-09
修稿时间:2006-05-09

Studying Dynamic Model of Wheel Loader Based on ADAMS
LI Yao-hui,SUN Zhong-chao,CHEN Bin,ZHANG Chuan-wei,LI Jian-hua. Studying Dynamic Model of Wheel Loader Based on ADAMS[J]. Coal Mine Machinery, 2006, 27(10): 81-83
Authors:LI Yao-hui  SUN Zhong-chao  CHEN Bin  ZHANG Chuan-wei  LI Jian-hua
Abstract:Presents a method of simulating the longitudinal stability analysis of wheel loader When the problem has been a major problem in the field of simulations . The model was built using muhibody dynamics software ADAMS. In this model, considered the tire model in detail, and the some complicated driving system mechanism was included. The longitudinal stability analysis is simulated and studiedo Through a road model with sloped is built in the simulation of traffic ability.
Keywords:ADAMS
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号