Temperature oscillation techniques for simultaneous measurement of thermal diffusivity and conductivity

Simple temperature ocillation techniques are described for the last measurement of thermal dill'usivity and conductivity of liquids. The liquid specimen is a slab bounded above and below by a reference material. Two Peltier elements mounted on the outer Surfaces of the reference layers generate temperature ocillationS of these surfaces. Temperature waves propagate tluough the reference layers into the specimen. The thermal dilhusivity of the specimen is deduced by measuring all evaluating the amplitude attenuation and or the phase shift between the fundamental temperature oscillations at the surface of the liquid specimen and at a well-defined position inside the specimen. If the thermal diffusivity of the specimen is known. the thermal conductivity is determined by the measured amplitude attenuation and or the phase shill between the fundamental temperature oscillations at the surface of the reference layer and at the surface of the specimen. Slab and semi-infinite body geometries are considered. Measurement cells are designed and experiments are carried out with water, ethanol. heptane. monane. and glycerine. The results of the measurements of thermal dilhusivity asree very well, and those of thermal conductivity reasonably well, with the data obtained from the literature.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19-24, 1994, Boulder, Colorado, U.S.A.Author to whom correspondence should be addressed.