| Abstract: | Recently, one type of thermal-type IR detector, the pyroelectric sensor, has become of great interest in commercial applications, because of its ability to operate without cooling, its constant detectivity independent of wavelength, and its low cost. The conventional pyroelectric materials are usually normal ferroelectric materials with a first and second phase transition. The working temperatures are sufficiently below the Curie temperature Tc for stable responsivity to temperature. Electric field induced-type pyroelectric sensors have also been proposed. Relaxor ferroelectric materials such as Pb(Mg1/3Nb2/3)O3 (PMN) and Pb(Sc1/2Ta1/2)O3 (PST), which have a glassy Curie temperature near room temperature, are used in this type of sensor. This paper describes the sensor properties of electric field induced-type pyroelectric sensors prepared by using PMN and PST ceramics as compared with the conventional type sensors. Material evaluations of PMN and PST ceramics were made to determine their dielectric and pyroelectric properties. PMN shows excellent induced pyroelectric properties for the sensors over a wide range of temperatures. On the other hand, PST seems to be inadequate for an IR detector because of a very narrow high-response temperature range. The sensors with PMN and PST ceramics show enhanced pyroelectric activities under dc bias field. The measured sensor voltage responsivities agree with the calculated values for the PMN case. The electric field induced-type infrared sensor with thick or thin film materials seems to be satisfactory as linear array IR detectors for thermal imaging, with application of a higher electric field. |
