| 基于FPGA的按键消抖电路设计方法的研究 |
| |
| 引用本文： | 于晶,杨晓慧,黄勇.基于FPGA的按键消抖电路设计方法的研究[J].电子设计工程,2011,19(22):1-3. |
| |
| 作者姓名： | 于晶 杨晓慧 黄勇 |
| |
| 作者单位： | 1. 长春理工大学,吉林长春,130000
2. 吉林博安消防设备有限公司,吉林长春,130000 |
| |
| 摘 要： | 采用了VHDL语言编程的设计方法,通过FPGA来实现按键消抖的硬件电路。论述了基于计数器、RS触发器和状态机3种方法来实现按键消抖电路,并给出仿真结果。通过下载到CycloneEP1C6T144芯片中进行验证,表明这3种方法设计的消抖电路都能够实现电路功能,其中有限状态机的方法更能确保每一次按键操作后准确输出按键确认信号,且性能稳定。
|
| 关 键 词： | 按键消抖 计数器 RS触发器 状态机 |
Methods of key-jitter elimination based on FPGA |
| |
| YU Jing,YANG Xiao-hui,HUANG Yong.Methods of key-jitter elimination based on FPGA[J].Electronic Design Engineering,2011,19(22):1-3. |
| |
| Authors: | YU Jing YANG Xiao-hui HUANG Yong |
| |
| Affiliation: | 1.Changchun University of Science and Technology,Changchun 130000,China; 2.Fire Equipment Co.,Ltd,Changchun 130000,China) |
| |
| Abstract: | In order to solve key jitter of FPGA system,use the design method of VHDL language programming to realize key-jitter.Discusses three methods base on counter,RS flip-flop and state machine with simulation and analysis.Being verified by the CycloneEP1C6T144,the three methods all able to achieve the circuit function,can guarantee a quick keypress once every time the response,and have stable property.The main innovation is using the most simple programming to realize key-jitter. |
| |
| Keywords: | key-jitter count RS flip-flop state machine |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
