Initiation Pressure Thresholds from Three Sources

Pressure thresholds are minimum pressures needed to start explosive initiation that ends in detonation. We obtain pressure thresholds from three sources. Run‐to‐detonation times are the poorest source but the fitting of a function gives rough results. Flyer‐induced initiation gives the best results because the initial conditions are the best known. However, very thick flyers are needed to give the lowest, asymptotic pressure thresholds used in modern models and this kind of data is rarely available. Gap test data are in much larger supply but the various test sizes and materials are confusing. We find that explosive pressures are almost the same if the distance in the gap test spacers are in units of donor explosive radius. Calculated half‐width time pulses in the spacers may be used to create a pressure‐time curve similar to that of the flyers. The very‐large Eglin gap tests give asymptotic thresholds comparable to extrapolated flyer results. The three sources are assembled into a much‐expanded set of near‐asymptotic pressure thresholds. These thresholds vary greatly with density: for TATB/LX‐17/PBX 9502, we find values of 4.9 and 8.7 GPa at 1.80 and 1.90 g/cm³, respectively.