首页 | 本学科首页   官方微博 | 高级检索  
     

一种基于二次曲线的全电动注塑机背压控制方法
引用本文:周会成,徐英鹏,吴继春,宋立志. 一种基于二次曲线的全电动注塑机背压控制方法[J]. 中国机械工程, 2013, 24(19): 2588-2596
作者姓名:周会成  徐英鹏  吴继春  宋立志
作者单位:华中科技大学国家数控系统工程技术研究中心,武汉,430074
基金项目:国家科技支撑计划资助项目(2012BAF13B01);国家科技重大专项(2012ZX04001-022)The National Key Technology R&D Program(No. 2012BAF13B01);National Science and Technology Major Project ( No. 2012ZX04001-022)
摘    要:提出了一种根据经验并基于二次曲线的螺杆后退速度控制方法,基于该方法实现了全电动注塑机计量过程中背压的控制。通过实验观察了在不同设定背压值下的实际控制效果,验证了算法的有效性。实验表明,所提出的方法能够很好地完成单级以及多级背压控制工艺要求。

关 键 词:全电动注塑机  背压  二次曲线  塑化  

A Backing Pressure Control Method for Electrical Injection Molding Machine Based on Quadratic Curve
Zhou Huicheng,Xu Yingpeng,Wu Jichun,Song Lizhi. A Backing Pressure Control Method for Electrical Injection Molding Machine Based on Quadratic Curve[J]. China Mechanical Engineering, 2013, 24(19): 2588-2596
Authors:Zhou Huicheng  Xu Yingpeng  Wu Jichun  Song Lizhi
Affiliation:National Numerical Control System Engineering Research Center,Huazhong University of Science & Technology,Wuhan,430074
Abstract:A method which was based on quadratic curve to control backing pressure was supplied. It is proved that this method can realize the control requirements in electrical injection molding machine. Experiments completed under the condition of several different setting backing pressures show the effectiveness of the approach. It indicates that the method can satisfy the control requirements of one stage or multistage backing pressure effectively.
Keywords:electrical injection molding machine,backing pressure,quadratic curve  metering,
点击此处可从《中国机械工程》浏览原始摘要信息
点击此处可从《中国机械工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号