| 切割机齿式联轴器改造 |
| |
| 引用本文： | 孙全善.切割机齿式联轴器改造[J].包钢科技,2003,29(Z1):98-99,27. |
| |
| 作者姓名： | 孙全善 |
| |
| 作者单位： | 包钢(集团)公司炼钢厂,内蒙古,包头,014010 |
| |
| 摘 要： | 简述方圆坯铸机切割机的构造,详细分析了齿式联轴器的受力情况及损坏原因,应用扭矩、转速理论校核了强度;针对故障原因采取了防范措施,控制了突发事故的发生,保证了设备的正常运行.
|
| 关 键 词： | 联轴器 强度校核 许用扭矩和转速 |
| 文章编号： | 1009-5438(2003)S0-0098-02 |
| 修稿时间： | 2003年8月26日 |
Modification of tooth coupling of the torch - cutting machine |
| |
| SUN Quan-shan.Modification of tooth coupling of the torch - cutting machine[J].Science & Technology of Baotou Steel(Group) Corporation,2003,29(Z1):98-99,27. |
| |
| Authors: | SUN Quan-shan |
| |
| Abstract: | The paper introduces the structure of torch cutting machine of bloom & round caster and analyzes the accepting force situation and breakdown of tooth coupling in detail. This paper also calculates the intensity by making use of the torque and rotation speed theory. |
| |
| Keywords: | coupling intensity calculation allowed torque and rotation speed |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
