| 磁力径向轴承几何中心自检测系统的研究 |
| |
| 引用本文： | 王晓光,胡业发,江征风,周祖德.磁力径向轴承几何中心自检测系统的研究[J].机械设计,2003,20(7):28-30. |
| |
| 作者姓名： | 王晓光 胡业发 江征风 周祖德 |
| |
| 作者单位： | 武汉理工大学,机电学院,湖北,武汉,430070 |
| |
| 基金项目： | 国家973项目(国科基字[2001]50号)，国家自然科学基金项目(50175084)，湖北省基金重点项目(2001ABA002) |
| |
| 摘 要： | 分析了磁悬浮主轴系统中径向轴承的几何中心与传感器分布中心的误差，以及上述误差对磁悬浮系统控制精度的影响。提出了磁悬浮径向轴承几何中心自检测的思想和自检测原理，以及磁悬浮主轴系统径向轴承几何中心自检测系统的硬件与软件的设计思路。分析和探讨了有关参数对测量精度的影响。
|
| 关 键 词： | 磁悬浮主轴系统 径向轴承 几何中心 传感器 自检测系统 耦合 |
| 文章编号： | 1001-2354(2003)07-0028-03 |
Study on self-detection system for geometric center of magnetic radial bearing |
| |
| WANG Xiao guang,HU Ye fa,JIANG Zheng feng,ZHOU Zu de.Study on self-detection system for geometric center of magnetic radial bearing[J].Journal of Machine Design,2003,20(7):28-30. |
| |
| Authors: | WANG Xiao guang HU Ye fa JIANG Zheng feng ZHOU Zu de |
| |
| Abstract: | The error between geometric center of radial bearing and sensors distribution center in a magnetic suspended spindle system,and the influence to controlling accuracy of magnetic suspension system offected by the above stated error were analyzed.The idea and principle of self-detection for geometric center of magnetic suspended radial bearing,and designing train of thought of hardware and software for self-detection system of magnetic center of radial bearing in magnetic suspension spindle system have been proposed.The influence upon measured accuracy affected by relevant parameters was analyzed and explored. |
| |
| Keywords: | magnetic bearing geometrical center self-detection coupling decoupling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
