Affiliation: | Mechanical & Industrial Engineering Department, Montana State University, Bozeman, MT 59717, USA |
Abstract: | A laboratory experiment was conducted to measure strength characteristics in dynamic (isokinetic) wrist flexion and extension. Twenty four college-age males exerted their maximum torque in both concentric flexion and extension at 60, 120, and 180°/s of angular velocity through a ±60° range of deviation from wrist neutral. Results show that velocity and motion direction significantly effected both peak torque as well as the postural displacement of peak torque. The value of peak torque decreased with an increase in velocity and the wrist angle at peak torque generally moved to a more deviated, flexed posture (from neutral) with increasing velocity as well. Peak torque for all velocity and motion-type conditions tested occurred in a flexed posture relative to neutral. It is anticipated that these results may be of use as biomechanically based considerations in the evaluation and design of upper extremity tasks involving wrist flexion/extension as well as to perhaps give insight into functional characteristics of the wrist. Finally, regression equations were developed to aid in the prediction of peak torque based upon task, individual and/or population parameters. Relevance to industry Results from this study should enhance the overall understanding of wrist functioning. Specifically, motion type, velocity of movement and wrist posture are important ergonomic design considerations. These results can also be used to modify existing biomechanical models that do not consider wrist variables. |