Effects of holding temperature and time on semi-solid isothermal heat-treated microstructure of ZA84 magnesium alloy

The feasibility of fabricating ZA84 magnesium alloy with non-dendritic microstructure by a semi-solid isothermal heat treatment process and the effects of holding temperature and time on the semi-solid isothermal heat-treated microstructure of the alloy were investigated. The results indicate that it is possible to produce ZA84 alloy with non-dendritic microstructure by suitable semi-solid isothermal heat treatment. After being treated at 560-575℃ for 120min, ZA84 magnesium alloy can obtain a non-dendritic microstructure with 14.2%-25.6% liquid fraction and an average size of 56-65μm of the unmelted primary solid particles. With the increasing holding time from 30 to 120min or holding temperature from 560 to 575℃, the average size of unmelted primary solid particles decreases and globular tendency becomes more obvious. Under the experimental condition, the microstructural evolution of ZA84 alloy during semi-solid isothermal treatment is mainly composed of three stages of initial coarsening. structulseparation and spheroidization. The subsequent coarsening of spheroidal grains is not observed.