首页 | 本学科首页   官方微博 | 高级检索  
     

大直径PA6/PA66共聚物单丝的后拉伸性能
引用本文:马海燕,刘兆峰,张军,马海军. 大直径PA6/PA66共聚物单丝的后拉伸性能[J]. 高分子材料科学与工程, 2012, 0(1): 93-96,100
作者姓名:马海燕  刘兆峰  张军  马海军
作者单位:东华大学纤维材料改性国家重点实验室;南通大学化学化工学院
摘    要:以PA6/PA66共聚物为原料,纺制大直径单丝。对大直径共聚尼龙单丝初生丝的后拉伸性能进行研究,主要分析拉伸温度、拉伸方式、拉伸倍率及其分配对单丝力学性能的影响,同时测定共聚尼龙单丝结构并与相关均聚物进行对比。研究了口模拉伸与常规拉伸对共聚尼龙单丝力学性能的影响。实验表明,采用二级拉伸方式时,最佳拉伸倍率为4.7倍,其中一级拉伸倍率占比85%。热水拉伸温度为90℃,热风拉伸温度为180℃。

关 键 词:共聚尼龙  拉伸倍率  温度  力学性能

Tensile Properties of the Large Diameter PA6/PA66 Copolymer Monofilaments
Haiyan Ma,Zhaofeng Liu,Jun Zhang,Haijun Ma. Tensile Properties of the Large Diameter PA6/PA66 Copolymer Monofilaments[J]. Polymer Materials Science & Engineering, 2012, 0(1): 93-96,100
Authors:Haiyan Ma  Zhaofeng Liu  Jun Zhang  Haijun Ma
Affiliation:1.State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,Donghua University,Shanghai 200051,China;2.College of Chemistry and ChemicalEngineering,Nantong University,Nantong 226000,China)
Abstract:The large diameter monofilaments were produced while the PA6/PA66 copolymers were used as raw materials.The properties of the large diameter copolymerization PA monofilaments after stretching were studied.The influence of stretching temperature,the stretching way,the stretching ratio and its distribution on the mechanical properties of the monofilaments was also studied.The structure of the copolymerization PA monofilaments was analyzed and compared with that of the similar homopolymer.The influence of mould stretch and normal stretch on the property of copolymerization polyamide(COPA) monofilament was studied.The result shows that: during the post-drawing,the best ratio of two-stage stretching is 4.7,the one-stage stretch percent is 85%,the temperature of hot water stretching is 90 ℃,and the temperature of hot air stretching is 180 ℃.
Keywords:copolymerization nylon  stretching ratio  temperature  mechanical property
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号