| Behavior of precipitation in bainitic steel during relaxation processing of RPC technique |
| |
| 作者姓名： | ShanwuYang ShaoqiangYuan： XueminWang HuibinWu XinlaiHe |
| |
| 作者单位： | [1]MaterialsScienceandEngineeringSchool,UniversityofScienceandTechnologyBeijing,Beijing100083,China [2]TangshanCollege,Tangshan063000,China |
| |
| 基金项目： | 国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | Thermal simulation test, TEM (Transmission Electron Microscope) and nanobeam EDS (Energy Dispersed x-ray Spectrum) techniques were used to investigate the precipitation behavior of Nb, Ti, Mo etc. in HSLA (High Strength Low Alloy) steel. The strain induced precipitation occurred during the isothermal relaxation stage after deformed in the non-recrystallization temperature region. After 30% predeformation at 850 and 900~C, there are two kinds of particles, (Ti,Nb)(C,N) and a few Nb(C,N), to precipitate during holding. The content of Nb in particles rises with the relaxation time increasing. During the final holding stage, some Nb and Ti atoms in the lattice sites of the precipitates would be replaced by Mo atoms, and the Mo content in the precipitates increases with the relaxation time. The results were compared with the refinement effect of microstructures caused by relaxationprecipitation controlling transformation (RPC) processing.
|
| 关 键 词： | 贝氏体钢 松弛过程 RPC 沉淀 纳米束能量分散X线光谱 微合金成分 |
Behavior of precipitation in bainitic steel during relaxation processing of RPC technique |
| |
| Shanwu Yang,Shaoqiang Yuan,Xuemin Wang,Huibin Wu,Xinlai He.Behavior of precipitation in bainitic steel during relaxation processing of RPC technique[J].Journal of University of Science and Technology Beijing,2004,11(3):230-234. |
| |
| Authors: | Shanwu Yang Shaoqiang Yuan Xuemin Wang Huibin Wu Xinlai He |
| |
| Abstract: | Thermal simulation test, TEM (Transmission Electron Microscope) and nanobeam EDS (Energy Dispersed x-ray Spectrum) techniques were used to investigate the precipitation behavior of Nb, Ti, Mo etc. In HSLA (High Strength Low Alloy) steel.The strain induced precipitation occurred during the isothermal relaxation stage after deformed in the non-recrystallization temperature region. After 30% predeformation at 850 and 900℃, there are two kinds of particles, (Ti,Nb)(C,N) and a few Nb(C,N), to precipitate during holding. The content of Nb in particles rises with the relaxation time increasing. During the final holding stage, some Nb and Ti atoms in the lattice sites of the precipitates would be replaced by Mo atoms, and the Mo content in the precipitates increases with the relaxation time. The results were compared with the refinement effect of microstructures caused by relaxationprecipitation controlling transformation (RPC) processing. |
| |
| Keywords: | RPC technique microalloyed element (Ti Nb)(C N) nanobeam EDS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
