Compositional dependence of phase formation and mechanical properties in three CoCrFeNi-(Mn/Al/Cu) high entropy alloys |
| |
Affiliation: | 1. Department of Physics and Materials Science, City University of Hong Kong, Hong Kong, China;2. Department of Mechanical and Biomedical Engineering, City University of Hong Kong, Hong Kong, China;1. Laboratory of Bulk Nanostructured Materials, Belgorod State University, Belgorod 308015, Russia;2. National Science Center “Kharkov Institute of Physics and Technology” NAS of Ukraine, Kharkov 61108, Ukraine;3. UES, Inc., 4401 Dayton-Xenia Rd., Dayton, OH 45432, USA;1. Thayer School of Engineering, Dartmouth College, 14 Engineering Drive, Hanover, NH 03755, USA;2. Advanced Photon Source, Argonne National Laboratory, Lemont, IL 60439, USA;1. Laboratory of Applied Physics and Mechanics of Advanced Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China;2. Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China;3. National Energy Technology Laboratory, 1450 Queen Ave SW, Albany, OR 97321, USA;4. AECOM Corporation, P. O. Box 1959, Albany, OR 97321, USA;5. Institute of Applied Mechanics and Biomedical Engineering, Taiyuan University of Technology, Taiyuan 030024, China |
| |
Abstract: | Starting from three typical equiatomic CoCrFeNiMn, CoCrFeNiAl and CoCrFeNiCu high entropy alloys (HEAs), we systematically investigated the compositional dependence of phase formation and mechanical properties of 78 alloys by varying the atomic ratio of the constituent elements. It was found that the simple phase structures, including a single face-centered cubic (FCC) or body-centered cubic (BCC) phase, duplex FCC phases, duplex BCC phases, instead of intermetallics, could form within a broad compositional landscape in 68 out of the 78 alloys not limited to the equiatomic composition where the configurational mixing entropy is maximum. This fact indicates that it may be the nature of the constituent elements that leads to simple phase structure formation. With compositional variation, the microstructure and mechanical properties including hardness and tensile properties show corresponding changes. It was found that the hardness variation of samples within the same structure is smaller for the FCC than that of the BCC. Tensile results indicated that the tensile elongation of (CoCrFeMn)(100−x)Nix (x = 0, 10 and 20) alloys increases with Ni addition due to the decreasing volume fraction of sigma phase. For the (CoCrFeAl)(100−x)Nix (x = 27.3, 33.3, 38.5, 42.9 and 50) alloys, the yield strength decreases and tensile elongation increases with Ni addition due to decreasing volume fraction of BCC phase which is hard yet brittle. The present results are important to understand the phase formation and relationship between microstructure and mechanical properties in HEAs. |
| |
Keywords: | High entropy alloys Phase formation Microstructure Mechanical property |
本文献已被 ScienceDirect 等数据库收录! |
|