首页 | 本学科首页   官方微博 | 高级检索  
     

扫描SAR全孔径成像处理方法
引用本文:吴玉峰,孙光才,邢孟道,保铮.扫描SAR全孔径成像处理方法[J].电子与信息学报,2011,33(10):2445-2451.
作者姓名:吴玉峰  孙光才  邢孟道  保铮
作者单位:西安电子科技大学雷达信号处理国家重点实验室 西安710071
基金项目:国家自然科学基金重大项目(60890072); 国家973计划项目(2010CB731903)资助课题
摘    要:该文提出了一种新的扫描SAR全孔径成像处理方法。首先根据谱分析(SPECAN)方法进行方位预滤波得到无模糊的二维频谱,在此基础上利用传统的非线性CS方法完成距离压缩及距离徙动校正,然后结合Dechirp思想将信号聚焦在频率域,最后通过Chirp-Z变换实现几何形变校正。该算法不需要插值操作和坐标转换,因此运算量小,效率高。仿真和实测数据处理结果验证了算法的有效性。

关 键 词:扫描SAR    全孔径处理    谱分析    Chirp-Z变换
收稿时间:2011-03-14

A Full-aperture Imaging Method for ScanSAR
Wu Yu-feng,Sun Guang-cai,Xing Meng-dao,Bao Zheng.A Full-aperture Imaging Method for ScanSAR[J].Journal of Electronics & Information Technology,2011,33(10):2445-2451.
Authors:Wu Yu-feng  Sun Guang-cai  Xing Meng-dao  Bao Zheng
Affiliation:Wu Yu-feng Sun Guang-cai Xing Meng-dao Bao Zheng(National Key Laboratory of Radar Signal Processing,Xidian University,Xi,an 710071,China)
Abstract:This paper proposes a new full-aperture imaging algorithm for ScanSAR.Firstly,the two dimensional(2-D) spectrum is obtained by the azimuth pro-filtering which adopts the idea of SPECAN.Then the Nonlinear Chirp Scaling(NCS) method is used to complete the range compression and Range Cell Migration Correction(RCMC).After that,the signal is focused in the Doppler domain by dechirping operation.Finally,geometric distortion correction is carried out via a Chirp-Z Transform(CZT).Without interpolation and coordinat...
Keywords:ScanSAR  Full-aperture processing  SPECAN  Chirp-Z transform(CZT)  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《电子与信息学报》浏览原始摘要信息
点击此处可从《电子与信息学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号