| 基于ABAQUS的微型车驱动桥壳有限元分析 |
| |
| 引用本文： | 廖抒华,陶砾莹,赵亮,李海建,张宝霞. 基于ABAQUS的微型车驱动桥壳有限元分析[J]. 广西工学院学报, 2011, 22(3): 32-34,40 |
| |
| 作者姓名： | 廖抒华 陶砾莹 赵亮 李海建 张宝霞 |
| |
| 作者单位： | 1. 广西工学院汽车工程系,广西柳州,545006
2. 柳州孔辉汽车科技有限公司,广西柳州,545006 |
| |
| 基金项目： | 2011年广西千亿元产业重大科技攻关工程项目(桂科计字[2011]14号1-10)资助 |
| |
| 摘 要： | 运用UG三维设计软件建立某微型车整体式驱动桥壳数模，基于HyperMesh、ABAQUS软件平台，建立该车驱动桥壳的FEA模型并进行有限元分析；在4种典型工况下分析获得的应力云图和位移图表明该桥壳的强度与刚度均能满足设计要求，计算效率高，并能在一定程度上缩短桥壳的开发周期，降低研发费用，可为驱动桥壳前期设计阶段精确高效地预测桥壳结构强度、刚度提供指导．
|
| 关 键 词： | 微型车 桥壳 ABAQUS 典型工况 强度与刚度 |
Finite Element Analysis of Driving Axle Housing of Mini-van Based on ABAQUS |
| |
| LIAO Shu-hua,TAO Li-ying,ZHAO Liang,LI Hai-jian,ZHANG Bao-xia. Finite Element Analysis of Driving Axle Housing of Mini-van Based on ABAQUS[J]. Journal of Guangxi University of Technology, 2011, 22(3): 32-34,40 |
| |
| Authors: | LIAO Shu-hua TAO Li-ying ZHAO Liang LI Hai-jian ZHANG Bao-xia |
| |
| Affiliation: | LIAO Shu-hua1,TAO Li-ying1,ZHAO Liang2,LI Hai-jian2,ZHANG Bao-xia1(1.Department of Automobile Engineering,Guangxi University of Technology,Liuzhou 545006,China,2.Liuzhou KONGHUI Automobile Technology Ltd.,China) |
| |
| Abstract: | In this paper,a driving axle housing's model for a mini van was established by means of UG 3D design software.Based on Hypermesh and ABAQUS software platform,A FEA model of the driving axle housing was built and analyzed.The stress cloud figure and displacement contour obtained by analyzing in four classic working conditions show that the strength and stiffness of this driving axle housing could meet the design requirements and the calculation efficiency was higher,To some extent,the cost and development cy... |
| |
| Keywords: | mini-van driving axle housing ABAQUS classic working conditions strength and stiffness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
