首页 | 本学科首页   官方微博 | 高级检索  
     

电磁搅拌作用下水口深度对液面波动的影响
引用本文:张静,杨龙,吴会平.电磁搅拌作用下水口深度对液面波动的影响[J].钢铁,2016,51(3):32-38.
作者姓名:张静  杨龙  吴会平
作者单位:燕山大学车辆与能源学院,河北 秦皇岛 066004
基金项目:国家自然科学基金资助项目(51304173);河北省高层次人才资助项目(B2013003009)
摘    要: 结晶器内液面波动会影响连铸坯的质量,施加电磁搅拌使钢液的液面呈旋转抛物面。电磁搅拌电流过大或拉速过高会造成保护渣卷渣现象,对铸坯质量造成不利的影响。以某钢厂?]250 mm连铸圆坯结晶器电磁搅拌为研究对象,采用电磁-流体单相耦合的方式及流体体积函数VOF模型,建立描述结晶器电磁搅拌作用下液面波动的数学模型,研究电磁搅拌作用下浸入式水口深度对液面波动的影响。研究表明,通过增大水口深度,能够改善因电磁搅拌强度过大或拉速过大造成的卷渣现象,减小水口附近的液面波动。

关 键 词:电磁搅拌,水口深度,液面波动    连铸  
收稿时间:2015-04-07

Influence of nozzle submerged depth on fluctuation of liquid level with electromagnetic stirring
ZHANG Jing,YANG Long,WU Hui-ping.Influence of nozzle submerged depth on fluctuation of liquid level with electromagnetic stirring[J].Iron & Steel,2016,51(3):32-38.
Authors:ZHANG Jing  YANG Long  WU Hui-ping
Affiliation:College of Vehicles and Energy,Yanshan University,Qinhuangdao 066004,Hebei,China
Abstract:Billet quality is affected by the molten steel level behavior in mold. The molten steel level is a rotating parabolic surface with electromagnetic stirring. The liquid level fluctuation near the outlet of nozzle will be increased with the growing stirring intensity and casting speed, which can cause the slag entrapment to happen. Based on the parameters of ?]250 mm round billet continuous casting with mold electromagnetic stirrer in a steel plant, the combined method of turbulence model and multiphase-flow model(VOF) was adopted to establish the mathematical model and study the influence of nozzle submerged depth on the liquid level fluctuation in the mold with electromagnetic stirring. The results show that: increasing the submerged depth of nozzle can decrease the slag entrapment, which was caused by large current intensity and large casting speed.
Keywords:electromagnetic stirring  nozzle depth  fluctuation of liquid level  continuous casting
本文献已被 万方数据 等数据库收录!
点击此处可从《钢铁》浏览原始摘要信息
点击此处可从《钢铁》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号