首页 | 本学科首页   官方微博 | 高级检索  
     

薄层状青云石矿的切割爆破技术
引用本文:郭学彬,薄传金,张杰涛.薄层状青云石矿的切割爆破技术[J].矿业研究与开发,2005,25(6):64-66.
作者姓名:郭学彬  薄传金  张杰涛
作者单位:西南科技大学环境工程学院,四川,绵阳市,621002
摘    要:对于薄层状青云石矿,密集的、强度较低的层理面严重影响切割爆破效果,不能沿用块状石材的切割爆破方法,因此需要进一步试验研究。在分析薄层状青云石矿强度特征和层裂破坏特性的基础上,对其进行了分离爆破和分割爆破试验。试验结果表明,只要采取合理的爆破参数和技术措施,对薄层状矿石同样可以获得良好的切割爆破效果。

关 键 词:青云石矿  薄层状矿石  饰面石材  切割爆破
文章编号:1005-2763(2005)06-0064-03
收稿时间:2005-01-10
修稿时间:2005年1月10日

Blasting Technology of Cutting Thin -Layer Qingyun- Stone
Guo Xuebin,Pu Chuanjin,Zhang Jietao.Blasting Technology of Cutting Thin -Layer Qingyun- Stone[J].Mining Research and Development,2005,25(6):64-66.
Authors:Guo Xuebin  Pu Chuanjin  Zhang Jietao
Affiliation:College of Environmental Engineering,Southwest University of Science and Technology, Mianyang, Sichuan 621002, China
Abstract:For thin - layered Qingyun - stone ore, the dense and lower strength bedding faces influence greatly the effect of cutting blasting, so the cutting blasting technology for massive stone cant be used to cut this stone, and its blasting technique needs further experimental studies. On the basis of analyzing strength and layer - crack damage characteristics of thin - layered Qinyun -stone ore, the separate blasting and cutting blasting tests are carried out on it. The results indicate that good cutting effects can be achieved if reasonable blasting parameters and technical measures is used for blasting thin - layered Qinyun - stone ore.
Keywords:Qinyun - stone ore  Thin - layered ore  Face - decorative stone  Cutting blasting
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《矿业研究与开发》浏览原始摘要信息
点击此处可从《矿业研究与开发》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号