| Zr基块体金属玻璃蠕变行为的纳米压痕研究 |
| |
| 引用本文： | 李春燕,朱福平,丁娟强,尹金锋,王铮,赵燕春,寇生中. Zr基块体金属玻璃蠕变行为的纳米压痕研究[J]. 稀有金属材料与工程, 2020, 49(10): 3353-3360 |
| |
| 作者姓名： | 李春燕 朱福平 丁娟强 尹金锋 王铮 赵燕春 寇生中 |
| |
| 作者单位： | 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,中国重汽集团济南卡车有限公司,兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室 |
| |
| 基金项目： | NSFC(No.51661016, No.51861021, No.51571105, No.51661017), Wenzhou Public Welfare Science and Technology Project (G20170019) |
| |
| 摘 要： | 在本工作中，通过纳米压痕实验研究了加载速率和保载时间对(Zr0.6336Cu0.1452Ni0.1012Al0.12)97.4Er2.6块体金属玻璃（BMG）的蠕变变形行为的影响。实验结果表明，合金试样的蠕变位移随着加载速率或保载时间的增加而增大。另一方面，合金样品的硬度（H）也随着加载速率或保载时间的增加而降低。合金试样在纳米压痕过程中具有尺寸效应，合金试样的硬度随着压痕深度的增加而降低。合金试样在纳米压痕过程中具有锯齿流动现象，并且该现象具有速率依赖性。具体而言，随着加载速率的减小，锯齿流动现象更加明显。合金试样的蠕变应力指数随着加载速率或保载时间的增加而减小。
|
| 关 键 词： | 纳米压痕 硬度 加载速率 应力指数 保载时间 |
| 收稿时间： | 2019-09-02 |
| 修稿时间： | 2019-12-29 |
Nanoindentation Investigation on Creep Behavior of Zr-Based Bulk Metallic Glass |
| |
| Li Chunyan,Zhu Fuping,Ding Juanqiang,Yin Jinfeng,Wang Zheng,Zhao Yanchun and Kou Shengzhong. Nanoindentation Investigation on Creep Behavior of Zr-Based Bulk Metallic Glass[J]. Rare Metal Materials and Engineering, 2020, 49(10): 3353-3360 |
| |
| Authors: | Li Chunyan Zhu Fuping Ding Juanqiang Yin Jinfeng Wang Zheng Zhao Yanchun Kou Shengzhong |
| |
| Affiliation: | State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou Gansu,State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou Gansu,State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou Gansu,State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou Gansu,Sinotruk Group Jinan Truck Company Limited,Jinan,State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou Gansu,State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou Gansu |
| |
| Abstract: | In the present work, the effect of loading rate and holding time on the creep deformation behavior of (Zr0.6336Cu0.1452Ni0.1012Al0.12)97.4Er2.6 bulk metallic glass (BMG) was investigated by using nanoindentation technique. Experimental results demonstrate that the creep displacement of specimen increases with the increase of loading rate or holding time. On the other hand, the hardness (H) of specimen falls with the rise of loading rate or holding time. The H drops with the growth of indentation depth during the nanoindentation process, which indicates that specimen has a size effect. Specimen has a serrated flow phenomenon which has rate dependence. Specifically, as the loading rate declines, the serrated flow phenomenon becomes more obvious. The creep stress exponent of specimen goes down with the increases of loading rate or holding time. |
| |
| Keywords: | Nanoindentation Hardness Loading rate Stress exponent Holding time |
|
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
|
