| CAE技术在数码相机注塑模设计中的应用 |
| |
| 引用本文： | 许勤周,郭志忠.CAE技术在数码相机注塑模设计中的应用[J].塑料,2005,34(4):68-71. |
| |
| 作者姓名： | 许勤周 郭志忠 |
| |
| 作者单位： | 揭阳职业技术学院实训与计算机中心,广东,揭阳,522000;华南热带农业大学工学院,海南,儋州,571737 |
| |
| 摘 要： | 为缩短产品开发周期,降低成本及提高产品质量,CAE技术越来越多地运用在注塑成型的模具设计中。以数码相机的外壳为例,通过比较分析结果来确定制品注塑成型中的浇口位置和数量,并对浇注系统进行了优化。选择出充模均匀、熔接痕不明显和气穴位置集中的成型方案,为探讨注塑成型应用CAE的方法提供借鉴。
|
| 关 键 词： | CAE 注塑成型 浇口布置 浇注系统 |
| 文章编号： | 1001-9456(2005)04-0068-04 |
| 修稿时间： | 2005年4月12日 |
Application of CAE Technology in the Injection Mould for Digital Camera |
| |
| XU Qin-zhou,GUO Zhi-zhong.Application of CAE Technology in the Injection Mould for Digital Camera[J].Plastics,2005,34(4):68-71. |
| |
| Authors: | XU Qin-zhou GUO Zhi-zhong |
| |
| Affiliation: | XU Qin-zhou~1,GUO Zhi-zhong~2 |
| |
| Abstract: | In order to reduce the development cycle and cost of products and improve the quality,the CAE technology is being used more and more in mould design of injection molding.Taking a shell of digital camera for example,the gate locations and numbers of plastic part in injection molding process are fixed on by comparing analysis results,and the runner systems are optimized.The best molding project is chosen by filling uniformity,unobvious weld line and centralizing air traps.It provides a reference to the method of applying CAE technology to injection molding. |
| |
| Keywords: | CAE injection molding gate location runner systems |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
