| 基于单张平面靶标的视觉测量系统快速校正研究 |
| |
| 引用本文： | 沈国峰,程筱胜,崔海华,戴宁. 基于单张平面靶标的视觉测量系统快速校正研究[J]. 机械设计与制造工程, 2014, 0(7): 57-60 |
| |
| 作者姓名： | 沈国峰 程筱胜 崔海华 戴宁 |
| |
| 作者单位： | 南京航空航天大学机电学院,江苏南京210016 |
| |
| 基金项目： | 基金项目：国家科技支撑计划项目（2009BA181B02） |
| |
| 摘 要： | 为解决双目测量系统传统标定方法过程复杂、应用条件苛刻、很难满足应用过程中准确快速校正的难题，提出了一种简便的校正算法。该算法仅需采集一张平面靶标图像，然后利用多视图几何中的绝对二次曲线特性，即可实现双目测量系统结构参数的校正优化。实验表明，利用该算法可以达到初始标定的精度，满足实际应用的可靠性需求。
|
| 关 键 词： | 双目测量 三维重建 系统校正 结构参数 |
Research on Rapid Correction of the Vision Measuring System Based on Single Plane Target Image |
| |
| SHEN Guofeng,CHENG Xiaosheng,CUI Haihua,DAI Ning. Research on Rapid Correction of the Vision Measuring System Based on Single Plane Target Image[J]. Machine Design and Manufacturing Engineering, 2014, 0(7): 57-60 |
| |
| Authors: | SHEN Guofeng CHENG Xiaosheng CUI Haihua DAI Ning |
| |
| Affiliation: | (Nanjing University of Aeronautics and Astronautics, Jiangsu Nanjing, 210016, China) |
| |
| Abstract: | It is rather difficult to rapidly and conveniently correct owing to the complexity and application condition of the traditional calibration method .In order to solve this issue , this paper proposes a simple and rapid co-rection algorithm , which only needs a single plane target image with the characteristics of absolute conic in the multiple view geometry.The experimental results show that the initial calibration precision can be achieved and the practical application demand can be satisfied by the proposed algorithm in this paper . |
| |
| Keywords: | Binocular Measuring 3D Reconstruction System Correction Structure Parameters |
| 本文献已被 维普 等数据库收录！ |
