首页 | 本学科首页   官方微博 | 高级检索  
     

纯钛材微弧氧化电参数对陶瓷层组织结构的影响
引用本文:李玉海,原瑜,邢贵和.纯钛材微弧氧化电参数对陶瓷层组织结构的影响[J].材料保护,2011,44(3):39-41,90.
作者姓名:李玉海  原瑜  邢贵和
作者单位:沈阳理工大学材料科学与工程学院,辽宁,沈阳,110159
摘    要:以往就纯钛材表面微弧氧化陶瓷层表面积对提供羟基磷灰石生长条件的研究不多,为此,在Na2HPO4电解液中,采用微弧氧化法在纯钛材表面制得多孔结构的二氧化钛陶瓷层.研究了正向电压、频率对微弧氧化陶瓷层组织结构的影响.结果表明,随正向电压升高,膜厚增加,孔径增大,表面变得粗糙;随频率的增加,膜层表面变得光滑,孔径减小,膜厚减...

关 键 词:微弧氧化  陶瓷层  纯钛材  电压  频率  组织结构

Effect of Electrical Parameters on the Microstructure of Micro-Arc Oxidation Ceramic Coatings on Titanium Substrate
LI Yu-hai,YUAN-Yu,XING Gui-he.Effect of Electrical Parameters on the Microstructure of Micro-Arc Oxidation Ceramic Coatings on Titanium Substrate[J].Journal of Materials Protection,2011,44(3):39-41,90.
Authors:LI Yu-hai  YUAN-Yu  XING Gui-he
Affiliation:LI Yu-hai,YUAN Yu,XING Gui-he(College of Material Science and Engineering,Shenyang University of Technology,Shenyang 110159,China)
Abstract:Porous TiO2 coating was prepared on Ti substrate by micro-arc oxidation in Na2HPO4 electrolyte.The effects of positive voltage and frequency on the microstructure of the coating were studied.Results show that the thickness,pore size and surface roughness of the coating increase with the increase of positive voltage,while they decrease with the increase of frequency.It was feasible to prepare uniform porous ceramic coating under a positive voltage of 450 V and frequency of 600 Hz.The ceramic coating mainly c...
Keywords:micro-arc oxidation  ceramic coating  titanium  voltage  frequency  microstructure  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号