一种燃料电池功率调节器的建模与控制 |
| |
引用本文: | 叶琼,全书海,黄亮,刘春玉.一种燃料电池功率调节器的建模与控制[J].武汉工学院学报,2013(5):682-685,689. |
| |
作者姓名: | 叶琼 全书海 黄亮 刘春玉 |
| |
作者单位: | [1]武汉理工大学自动化学院,湖北武汉430070 [2]武汉理工大学新能源检测与控制研究中心,湖北武汉430070 |
| |
基金项目: | 基金项目:国家自然科学基金专项基金资助项目(51247003);国家863计划基金资助项目(2012AA110601);高等学校博士学科点专项科研基金资助项目(20090143110004). |
| |
摘 要: | 燃料电池发电因其高效环保越来越受到社会各界的关注,但其输出电压范围宽、特性偏软,必须借助于大功率DC/DC变换器作为输出功率调节环节。通过分析燃料电池发电系统中的功率分配原理,引入蓄电池二阶RC等效电路,从输出功率的角度对调节器进行建模并设计了相应的控制器,通过在Matlab中仿真和制作样机试验,均取得了良好的效果,结果证明了设计的合理性。
|
关 键 词: | 燃料电池 功率调节 蓄电池 Matlab仿真 |
Modeling and Control of Power Regulator for Fuel Cell |
| |
Authors: | YE Qiong QUAN Shuhai HUANG Liang LIU Chunyu |
| |
Affiliation: | School of Automation, WUT, Wuhan 430070, China. |
| |
Abstract: | The fuel cell power generation is widely concerned by the community for its high efficiency and environmental friendly. But its output is soft and in wide range, so a high power DC/DC converter is necessary to be used as the power regula- tor. The power distribution in the cell power generation system was analyzed and the regulator model was established with battery 2nd RC model, and the corresponding controller was designed at the same time. Matlab simulation and experimental prototype achieved good effects. The results prove the design be rational. |
| |
Keywords: | fuel cell power regulate battery Matlab simulation |
本文献已被 维普 等数据库收录! |