| 洗发液瓶盖注射模设计 |
| |
| 引用本文： | 张晓黎,张磊,刘保臣. 洗发液瓶盖注射模设计[J]. 模具工业, 2008, 34(1): 47-49 |
| |
| 作者姓名： | 张晓黎 张磊 刘保臣 |
| |
| 作者单位： | 郑州大学,材料科学与工程学院,河南,郑州,450001 |
| |
| 摘 要： | 通过对洗发液瓶盖的使用要求与成型工艺进行分析,确定了3次分型的模具结构设计。利用Moldflow软件模拟分析后,确定了模具最佳浇口位置和浇注系统结构,可实现塑件的大批量自动化生产。
|
| 关 键 词： | 洗发液瓶盖 3次分型 注射模 |
| 文章编号： | 1001-2168（2008）01-0047-03 |
| 收稿时间： | 2007-09-03 |
| 修稿时间： | 2007-09-03 |
Design of injection mould for the cap of bottle for shampoo |
| |
| ZHANG Xiao-li,ZHANG Lei,LIU Bao-chen. Design of injection mould for the cap of bottle for shampoo[J]. Die & Mould Industry, 2008, 34(1): 47-49 |
| |
| Authors: | ZHANG Xiao-li ZHANG Lei LIU Bao-chen |
| |
| Abstract: | The structure of an injection mould with three-step parting mechanism was designed after an analysis on the requirements for use and the forming process for the cap of a bottle for sham- poo. The preferred gate location and runner system structure were determined based on the simulation research result of software Moldflow. |
| |
| Keywords: | cap of bottle for shampoo three-step parting mechanism injection mould |
| 本文献已被 维普 万方数据 等数据库收录！ |
