| 安装座多工位级进模设计 |
| |
| 引用本文： | 刘占军,王铁丽,吴钢,师建民. 安装座多工位级进模设计[J]. 模具工业, 2007, 33(8): 31-33 |
| |
| 作者姓名： | 刘占军 王铁丽 吴钢 师建民 |
| |
| 作者单位： | 沈阳航空工业学院,辽宁,沈阳,110034;天马医药工程安装有限公司,辽宁,沈阳,110034 |
| |
| 摘 要： | 分析了安装座的冲压工艺性,介绍了其特殊级进模总体设计结构和排样方案。实践证明,该模具结构合理、可靠,能保证产品质量,对此类零件的级进模设计有参考价值。
|
| 关 键 词： | 安装座 级进模 排样设计 |
| 文章编号： | 1001-2168（2007）08-0031-03 |
| 修稿时间： | 2007-03-25 |
Development of multi-position progressive die for soleplate component part |
| |
| LIU Zhan-jun,WANG Tie-li,WU Gang,SHI Jian-min. Development of multi-position progressive die for soleplate component part[J]. Die & Mould Industry, 2007, 33(8): 31-33 |
| |
| Authors: | LIU Zhan-jun WANG Tie-li WU Gang SHI Jian-min |
| |
| Affiliation: | 1. Shenyang Institute of Aeronautical Engineering, Shenyang, Liaoning 110034, China; 2.Tianma Medicine Engineering Installation Co, Ltd, Shenyang, Liaoning 110034, China |
| |
| Abstract: | The stamping process for a soleplate component part was analyzed.The general structure and layout design of a progressive die for the forming were presented.The application showed that the die operates reliably and can ensure the product quality. |
| |
| Keywords: | soleplate component part progressive die layout design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
