Bidirectional calibration results for 11 spectralon and 16 BaSO4 reference reflectance panels

Eleven Spectralon¹ (a sintered polytetrafluoroethylene-based material) and 16 BaSO₄ reference reflectance panels were calibrated using a field calibration technique. The Spectralon panels differed both in their directional/hemispherical and directional/directional reflectance. However, the differences were sufficiently small that “general” calibration equations were developed. For panels constructed of the same material and with the same methods as those used in these experiments, the directional/directional reflectance may be within ± 0.020 at 10°, ± 0.015 at 45°, and ± 0.041 at 80° of that predicted by the “general” equations. For field measurements, these values are considerably better than those that would be obtained using a value of the directional/hemispherical reflectance. The directional/directional reflectance of the 16 BaSO₄ panels varied considerably among panels, so much so that it was not feasible to develop “general” calibration equations. Apparently, the nonlambertian properties of BaSO₄ panels are dependent upon the method of applying the barium sulfate coating.