Polymer solar cells with a TiO2:Ag layer |
| |
Authors: | Agnieszka Iwan Bartosz Boharewicz Agnieszka Hreniak Igor Tazbir Jacek Chmielowiec |
| |
Affiliation: | 1. Division of Electrotechnology and Materials Science, Electrotechnical Institute, Wroclaw, Polanda.iwan@iel.wroc.pl;3. Division of Electrotechnology and Materials Science, Electrotechnical Institute, Wroclaw, Poland |
| |
Abstract: | Photovoltaic (PV) polymer solar cells with Ag and titanium dioxide were fabricated to improve the PV performance by increasing the amount of Ag in TiO2 (by 3, 5, 7, and 10%). Sol–gel method was used to obtain amorphous or crystalline form of titanium dioxide layers. The solar cells with poly(3-hexylthiophene) and 6,6]-phenyl-C61-butyric acid methyl ester active layer in two various positions of titanium dioxide in device were tested. Higher PV performance was received by introducing TiO2 with 5% of Ag between ITO and PEDOT:PSS in device and by heating the layer at 130 °C. The viscosity of applied PEDOT:PSS strongly influences the values of power conversion efficiency of the constructed polymer devices with titanium dioxide. |
| |
Keywords: | TiO2 titanium dioxide silver organic solar cells polymer solar cells PEDOT:PSS |
|
|