| 射孔深度计算的计算机处理方法 |
| |
| 引用本文： | 田素月,王勤华,廖鸿龙.射孔深度计算的计算机处理方法[J].油气井测试,2003,12(4):41-44. |
| |
| 作者姓名： | 田素月 王勤华 廖鸿龙 |
| |
| 作者单位： | 中原石油勘探局测井公司 |
| |
| 摘 要： | 依据手工射孔深度计算原理，设计了计算机处理方法。通过对计算机处理过程和实现方法，包括数据预处理、接箍标定、深度校正、标准接箍确定和上提值计算等的介绍，以及与手工处理结果进行分析比较。可以发现，射孔深度计算的计算机处理方法切实可行。
|
| 关 键 词： | 射孔深度 计算 计算机处理方法 数据预处理 接箍标定 深度校正 油气井 |
Computer Processing Method of Calculating Perforating Depth |
| |
| Tian Suyue,Wang Qinhua,Liao Honglong.Computer Processing Method of Calculating Perforating Depth[J].Well Testing,2003,12(4):41-44. |
| |
| Authors: | Tian Suyue Wang Qinhua Liao Honglong |
| |
| Affiliation: | Well Logging Company of Zhongyuan Oilfield |
| |
| Abstract: | According to the principle of manual calculating perforating depth, the paper has designed computer processing method. By the introduction of computer processing procedure and realizing method, including data preprocessing, coupling standardization, depth correction,standard coupling ascertain and upward strain value etc,and comparing with manual processing results, the computer processing method of calculating perforating depth is operable. |
| |
| Keywords: | Subject heading perforating depth computer processing method study |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
