| 工艺参数对注射成形各向异性粘结NdFeB磁体性能的影响 |
| |
| 引用本文： | 段柏华,曲选辉,邹黎明,徐征宙,郭世柏.工艺参数对注射成形各向异性粘结NdFeB磁体性能的影响[J].粉末冶金技术,2005,23(5):352-355. |
| |
| 作者姓名： | 段柏华 曲选辉 邹黎明 徐征宙 郭世柏 |
| |
| 作者单位： | 1. 北京科技大学材料科学与工程学院,北京,100083;中南大学粉末冶金国家重点实验室,长沙,410083
2. 北京科技大学材料科学与工程学院,北京,100083 |
| |
| 基金项目： | 科技部科研项目;国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | 研究了注射温度、模具温度、注射压力及注射速度对注射成形各向异性粘结NdFeB磁体的磁性能及力学性能的影响，并分析了其原因。结果表明：注射温度及模具温度对磁体磁性能影响较大，而注射压力则对磁体的抗压强度影响较大。在最佳的注射参数下，获得了最大磁能积和抗压强度分别为90kJ／m^3及130MPa的高性能粘结磁体。
|
| 关 键 词： | 注射成形 粘结钕铁硼磁体 工艺参数 磁性能 |
| 收稿时间： | 2003-12-26 |
| 修稿时间： | 2003年12月26 |
Effect of processing parameters on the properties of injection molding anisotropic bonded NdFeB magnet |
| |
| Duan Bohua,Qu Xuanhui,Zhou Limeng,Xu Zhengzhou,Guo Shibo.Effect of processing parameters on the properties of injection molding anisotropic bonded NdFeB magnet[J].Powder Metallurgy Technology,2005,23(5):352-355. |
| |
| Authors: | Duan Bohua Qu Xuanhui Zhou Limeng Xu Zhengzhou Guo Shibo |
| |
| Abstract: | The effect of processing parameters including injection temperature, mould temperature, injection pressure and injection velocity on the properties of injection molded bonded anisotropic NdFeB magnet was investigated, and the reasons of effect were also analyzed. The results show that injection temperature and mould temperature has the remarkable influence on the magnetic properties,while the injection pressure has the significant influence on the mechanics properties. On the basis of the research,the bonded magnet with high performance is obtained with maximum energy product (BH)(max) and compression strength being 90 kJ/m~3, 130MPa respectively. |
| |
| Keywords: | injection molding bonded NdFeB magnet processing parameter magnetic properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
