| 8090 Al-Li合金激光焊及焊后的组织与性能 |
| |
| 引用本文： | 王蕾,石崇刚. 8090 Al-Li合金激光焊及焊后的组织与性能[J]. 中国激光, 1999, 26(10): 951-954 |
| |
| 作者姓名： | 王蕾 石崇刚 |
| |
| 作者单位： | 南京航空航天大学材料科学与工程系,南京,210016 |
| |
| 摘 要： | 研究了8090Al－Li合金的YAG激光焊，通过金相观察、显微硬度测定以及电子探针微区成分分析，结果表明：在一定的焊接工艺参数下，能得到优良的焊接接头。单面焊能焊厚度≤0．7mm，双面焊能焊厚度≤1．4mm，焊缝为细晶组织，焊缝窄，热影响区小，焊后应即时去应力处理。
|
| 关 键 词： | Al－Li合金 激光焊 焊接接头 |
| 收稿时间： | 1998-04-24 |
Welding of Joints of 8090 Al-Li Alloy by Laser Welding and Their Structure and Properties |
| |
| Wang Lei,Shi Chonggang. Welding of Joints of 8090 Al-Li Alloy by Laser Welding and Their Structure and Properties[J]. Chinese Journal of Lasers, 1999, 26(10): 951-954 |
| |
| Authors: | Wang Lei Shi Chonggang |
| |
| Abstract: | Welded joints of Al-Li alloy welded by YAG laser are investigated through metalloscopy, micro-hardness and electron probe micro-analysis. The results showed that a suitable welded joint can be obtained under proper welding parameters. The thoroughly penetrated thickness does not exceed 0. 7 mm for the single impulse welding and 1. 4 mm for the double impulse welding. The we1d is narrow and has a fine grain structure while the wideness of the heat affected zone is small. Moreover, a stress releasing treatment must be done as soon as possible after welding. |
| |
| Keywords: | Al-Li alloy laser welding weld joint |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
