| 低合金钢气体保护焊焊丝残余Al对焊缝氢气孔的影响 |
| |
| 引用本文： | 孙维峰,谭长瑛,张显辉. 低合金钢气体保护焊焊丝残余Al对焊缝氢气孔的影响[J]. 焊接, 2001, 0(12): 17-19 |
| |
| 作者姓名： | 孙维峰 谭长瑛 张显辉 |
| |
| 作者单位： | 哈尔滨焊接研究所,150080 |
| |
| 摘 要： | 低合金钢气体保护焊实心焊丝中的残余Al对焊缝金属氢气孔的影响，既取决于焊丝的合金体系，又与保护气体氧化性的强弱有关。含有一定量残余Al的低合金耐热钢焊丝在80％Ar 20%CO2富氩混合气体保护焊工艺条件下，其焊缝金属极易产生氢气孔。
|
| 关 键 词： | 焊丝 氢气孔 焊缝 低合金钢 气体保护焊 残余铝 |
| 修稿时间： | 2001-11-01 |
INFLUENCE OF RESIDUAL ALUMINIUM IN LOW ALLOY STEEL WELDING WIRES ON HYDROGEN POROSITY IN WELD METAL |
| |
| Harbin Research Institute of Welding Sun Weifeng,Tan Changying,Zhang Xianhui. INFLUENCE OF RESIDUAL ALUMINIUM IN LOW ALLOY STEEL WELDING WIRES ON HYDROGEN POROSITY IN WELD METAL[J]. Welding & Joining, 2001, 0(12): 17-19 |
| |
| Authors: | Harbin Research Institute of Welding Sun Weifeng Tan Changying Zhang Xianhui |
| |
| Abstract: | For different shielding gases and welding wires, the influences of residual aluminium on hydrogen porosity in weld metal are different with each other. It was confirmed that the hydrogen porosity easily existed in weld metal of the heat resistant steel when the steel was welded using the welding wire containing residual aluminium and the mixed shielding gas consisting of 80%Ar+20%CO 2. |
| |
| Keywords: | welding wires Aluminium hydrogen porosity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
