首页 | 本学科首页   官方微博 | 高级检索  
     

活性剂对CO2气体保护焊焊缝成形及飞溅的影响
引用本文:袁玉兰,王惜宝,朱冬妹,刘丹.活性剂对CO2气体保护焊焊缝成形及飞溅的影响[J].材料开发与应用,2006,21(1):24-27,30.
作者姓名:袁玉兰  王惜宝  朱冬妹  刘丹
作者单位:天津大学材料科学与工程学院,天津,300072;天津大学材料科学与工程学院,天津,300072;天津大学材料科学与工程学院,天津,300072;天津大学材料科学与工程学院,天津,300072
摘    要:使用自制的活性焊丝,研究了活性剂对CO2气体保护焊焊缝成形及飞溅的影响。结果表明,使用活性剂可以使焊接飞溅率大大降低,焊缝熔深增加,熔宽增大,焊缝表面成形光滑。认为CO2气体保护焊飞溅降低的原因,是因为活性剂的加入在降低了混合气体的有效电离电压的同时显著增加了CO2电弧的导电能力,使电弧能量密度增加,从而使中等电流下的熔滴过渡方式由大颗粒过渡转变成细颗粒过渡。

关 键 词:活性剂  活化焊接  CO2气体保护焊  飞溅
文章编号:1003-1545(2006)01-0024-04
收稿时间:2005-09-01
修稿时间:2005-09-01

Effect of Activating Flux on Appearance of Welds and Spatter in CO2 Arc Welding
YUAN Yu-lan,WANG Xi-bao,ZHU DONG-mei,LIU Dan.Effect of Activating Flux on Appearance of Welds and Spatter in CO2 Arc Welding[J].Development and Application of Materials,2006,21(1):24-27,30.
Authors:YUAN Yu-lan  WANG Xi-bao  ZHU DONG-mei  LIU Dan
Affiliation:The College of Material Science and Engineering Tianjin University,Tianjin 30072 ,China
Abstract:The influence of activating flux on appearance of welds and spatter in CO2 are welding with self-made activating welding rod was investigated. The experiments showed that with the activating flux,the spatter loss coefficient decreased, the depth and width of penetration increased and the appearance of wetds was smooth. It is recognized that the activating flux decreases the effective ionizing voltage of mixed gases and incaeases conductibility of CO2 arc and makes the transfer droplet finer in middle current which contributes to the decrease of spatter.
Keywords:Activating fluxes  Activaling welding  CO2 are welding  Spatter
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号