首页 | 本学科首页   官方微博 | 高级检索  
     

基于最大转矩电流比控制的永磁同步电机模型预测控制
引用本文:刘雪松,刘文生.基于最大转矩电流比控制的永磁同步电机模型预测控制[J].电机与控制应用,2017,44(8):38-42.
作者姓名:刘雪松  刘文生
作者单位:大连交通大学 电气信息学院,辽宁 大连116028,大连交通大学 电气信息学院,辽宁 大连116028
摘    要:由于永磁同步电机(PMSM)具有诸多优点,提出了一种基于最大转矩电流比(MTPA)控制的永磁同步电机模型预测控制方法,使磁阻转矩利用率最大化。利用离散化的数字处理技术,深入研究了多个优化目标的典型问题,其中包括:开关状态约束、MTPA优化、最大电流限制及延时补偿策略等。MATLAB/Simulink仿真数据证明:该控制系统实现了MTPA控制并且动态响应过程十分迅速,而且显著提升了PMSM模型预测控制系统的工作效率,对电机参数产生的波动显示出较强的鲁棒性。

关 键 词:永磁同步电机    模型预测控制    最大转矩电流比控制

Model Predictive Control Method of Permanent Magnet SynchronousMotor Based on Maximum Torque Per Ampere
LIU Xuesong and LIU Wensheng.Model Predictive Control Method of Permanent Magnet SynchronousMotor Based on Maximum Torque Per Ampere[J].Electric Machines & Control Application,2017,44(8):38-42.
Authors:LIU Xuesong and LIU Wensheng
Affiliation:School of Electrical and Information Engineering, Dalian Jiaotong University, Dalian 116028, China and School of Electrical and Information Engineering, Dalian Jiaotong University, Dalian 116028, China
Abstract:Because of the many advantages of PMSM, a model predictive control method of PMSM based on maximum torque current ratio (MTPA) control to maximize the utilization of reluctance torque was presented. The typical problems of several optimization targets were studied in detail, including switch state constraints, MTPA optimization, maximum current limit and delay compensation strategy, using discrete digital processing techniques. The simulation results of MATLAB/Simulink showed that the control system achieved the maximum torquecurrent ratio control and the dynamic response process was very fast, and the working efficiency of the PMSM model predictive control system was improved remarkably, and the fluctuation of the motor parameter showed strong robustness.
Keywords:permanent magnet synchronous motor (PMSM)  model predictive control (MPC)  maximum torque per ampere (MTPA)
本文献已被 CNKI 等数据库收录!
点击此处可从《电机与控制应用》浏览原始摘要信息
点击此处可从《电机与控制应用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号