| 齿轮齿距仪的改造及检测系统设计 |
| |
| 引用本文： | 潘宁,杨雪锋. 齿轮齿距仪的改造及检测系统设计[J]. 煤矿机械, 2006, 27(3): 493-495 |
| |
| 作者姓名： | 潘宁 杨雪锋 |
| |
| 作者单位： | 中国矿业大学,机电工程学院,江苏,徐州,221008;中国矿业大学,机电工程学院,江苏,徐州,221008 |
| |
| 摘 要： | 针对上置式齿轮齿距仪定位不准确,测量力不恒定,人工读数误差较大,数据处理麻烦,装配调整不便,测量效率较低等。通过改造,重新设计了调整螺母、辅助弹性定位爪、可调式支脚等;并采用容栅传感器代替原机械式千分表,同时研制出具有数据采集,液晶显示,串行通讯的转换接口。对改造后的齿距仪进行了重复实验,结果表明:不仅测量效率有了极大地提高,同时也提高了测量精度,改善了性能。
|
| 关 键 词： | 上置式齿距测量仪 容栅传感器 智能接口 |
| 文章编号： | 1003-0794（2006）03-0493-03 |
| 收稿时间： | 2005-12-12 |
| 修稿时间： | 2005-12-12 |
Improvement of Portable Gear Pitch Tester and Design of Measurement System |
| |
| PAN Ning,YANG Xue-feng. Improvement of Portable Gear Pitch Tester and Design of Measurement System[J]. Coal Mine Machinery, 2006, 27(3): 493-495 |
| |
| Authors: | PAN Ning YANG Xue-feng |
| |
| Abstract: | There are many shortages in the portable gear pitch tester we using at present when we check gear.Such as fixed position is not accurate,strength can't keep invariableness,reading existed artificial error,assemble is not convenience etc..Aims at the above shortages reform this tester.Redesigned the adjusting spring nuts,positioning claw,adjustable supporting bolster etc.,and replaced original machine micrometer with the electronic digital indicator and designed an intelligent interface to PC.A series of experiment indicate this new tester is completely up to the mustard,and can increase the work efficiency. |
| |
| Keywords: | portable gear pitch tester capacitance grating sensor intelligent interface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
