| 超声电沉积法制备Ni-Y2O3纳米复合镀层的工艺 |
| |
| 引用本文： | 申晨,薛玉君,刘红彬,韩红彪,刘义. 超声电沉积法制备Ni-Y2O3纳米复合镀层的工艺[J]. 材料保护, 2009, 42(7) |
| |
| 作者姓名： | 申晨 薛玉君 刘红彬 韩红彪 刘义 |
| |
| 作者单位： | 河南科技大学机电工程学院,河南,洛阳,471003;河南科技大学机电工程学院,河南,洛阳,471003;河南科技大学机电工程学院,河南,洛阳,471003;河南科技大学机电工程学院,河南,洛阳,471003;河南科技大学机电工程学院,河南,洛阳,471003 |
| |
| 基金项目： | 国家自然科学基金，教育部科学技术研究重点项目 |
| |
| 摘 要： | Y2O3-Ni复合电沉积层性能优异,用途颇多,但目前有关这方面的研究报道较少.采用超声波技术电沉积制备了Ni-Y2O3纳米复合镀层,考察了制备工艺参数对复合镀层中Y2O3含量和镀层硬度的影响,采用环境扫描电子显微镜(ESEM)对纳米复合镀层的表面形貌进行了分析.结果表明,Y2O3添加量20g/L、Jc 2 A/dm2、超声波功率300 W时,复合镀层的表面组织均匀致密、晶粒细小且显微硬度较高;超声波空化作用产生的微射流可以减少纳米颗粒团聚,提高镀层的性能.
|
| 关 键 词： | 电沉积 超声波 Ni-Y2O3 纳米复合镀层 性能 |
Process for Preparation of Ni-Nano Y_2O_3 Composite Coating by ELectrodeposition in the Presence of Ultrasonic Irradiation |
| |
| SHEN Chen,XUE Yu-jun,LIU Hong-bin,HAN Hong-biao,LIU Yi. Process for Preparation of Ni-Nano Y_2O_3 Composite Coating by ELectrodeposition in the Presence of Ultrasonic Irradiation[J]. Journal of Materials Protection, 2009, 42(7) |
| |
| Authors: | SHEN Chen XUE Yu-jun LIU Hong-bin HAN Hong-biao LIU Yi |
| |
| Affiliation: | SHEN Chen,XUE Yu-jun,LIU Hong-bin,HAN Hong-biao,LIU Yi (School of Electromechanical Engineering,Henan University of Science , Technology,Luoyang 471003,China). |
| |
| Abstract: | Ni-nanometer Y2O3 composite (Ni-Y2O3) coating was prepared by eletrodeposition in the presence of ultrasounic irradiation. The effect of technological parameters on the hardness and content of Y2O3 nanoparticles in the deposits was studied. And the surface morphology of the composite coating was observed using an environmental scanning electron microscope (ESEM). Results show that the composite coating prepared from the plating bath containing 20 g/L Y2O3 at an electric current density of 2 A/dm2 and ultras... |
| |
| Keywords: | Ni-Y2O3 electrodeposition ultrasound Ni- Y2O3 composite coating property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
