| 非接触感应电能传输系统可分离变压器特性分析 |
| |
| 引用本文： | 毛赛君 王慧贞. 非接触感应电能传输系统可分离变压器特性分析[J]. 电源世界, 2006, 0(5): 37-39 |
| |
| 作者姓名： | 毛赛君 王慧贞 |
| |
| 作者单位： | 南京航空航天大学航空电源航空科技重点实验室,南京210016 |
| |
| 摘 要： | 本文对非接触感应电能传输系统中可分离变压器的特点进行了研究,分析了可分离变压器的磁路和电路,讨论了变压器绕组位置和气隙对可分离变压器参数的影响,并利用ANSYS电磁场仿真软件进行定性分析,得出了一些关键设计准则。并在气隙为 4mm和10mm的可分离变压器构成的1kW原理样机进行了实验验证,给出了实验结果。
|
| 关 键 词： | 可分离变换器 非接触感应电能传输 耦合系数 |
| 文章编号： | 1561-0349（2006）05-0037-03 |
| 收稿时间： | 2006-01-12 |
| 修稿时间： | 2006-04-21 |
Characteristic Analyses for Separate Transformer in Contactless Inductive Power Transfer System |
| |
| Mao Saijun, Wang Huizhen. Characteristic Analyses for Separate Transformer in Contactless Inductive Power Transfer System[J]. the world of power supply, 2006, 0(5): 37-39 |
| |
| Authors: | Mao Saijun Wang Huizhen |
| |
| Abstract: | The characteristic of the separate transformer in the contactless inductive power transfer system is proposed in this paper. The magnetic circuit and equivalent circuit of the separate transformer are analyzed. Transformer parameters influence due to the coil position and air gap is discussed and simulated by means of ANSYS simulation. Some design considerations are obtained. Finally, 1kW prototype with a 4mm and 10mm air-gap separate transformer conforms the design and performance; the experimental results are also included in this paper. |
| |
| Keywords: | separate transformer contac'tless inductive power transfer coupling factor mutual inductance leakage inductance |
| 本文献已被 CNKI 维普 等数据库收录！ |
