| 基于AutoCAD的可展开曲面钣金构件展开的研究 |
| |
| 引用本文： | 黄伟,孙东明.基于AutoCAD的可展开曲面钣金构件展开的研究[J].一重技术,2007(3):20-22. |
| |
| 作者姓名： | 黄伟 孙东明 |
| |
| 作者单位： | 昆明理工大学机电工程学院,云南,昆明,650093 |
| |
| 摘 要： | 分析可展开曲面的形成特点,在AutoCAD三维环境下,获得构件表面素线的长度和位置数据。以此数据为基础,在二维环境中画出构件的展开图。
|
| 关 键 词： | AutoCAD环境 可展开曲面 素线 钣金构件 展开 |
| 文章编号： | 1673-3355（2007）03-0011-03 |
| 修稿时间： | 2007-02-082007-03-21 |
Research on developed view of expandable curved face plate work piece based upon AutoCAD |
| |
| Huang Wei,Sun Dongming.Research on developed view of expandable curved face plate work piece based upon AutoCAD[J].CFHI Technology,2007(3):20-22. |
| |
| Authors: | Huang Wei Sun Dongming |
| |
| Abstract: | The article analyzes the forming characteristics of the expandable curved face. Under AutoCAD three-dimensional environment, the length and location data of the line between adjoining planes are obtained. The developed view will be drawn up under two-dimensional environment based upon the above data. |
| |
| Keywords: | AutoCAD environment expandable curved face lines between adjoining planes plate work piece develop |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
