| 聚合物微流控芯片模具制造关键技术研究进展 |
| |
| 引用本文： | 宋满仓,于超,张建磊,周飞,解廷利. 聚合物微流控芯片模具制造关键技术研究进展[J]. 模具工业, 2012, 38(2): 1-6 |
| |
| 作者姓名： | 宋满仓 于超 张建磊 周飞 解廷利 |
| |
| 作者单位： | 1. 大连理工大学模塑制品教育部工程研究中心,辽宁大连116023;三菱电机大连理工大学电加工技术中心,辽宁大连116023
2. 大连理工大学模塑制品教育部工程研究中心,辽宁大连,116023 |
| |
| 摘 要： | 成型微通道型腔镶块的加工是聚合物微流控芯片模具制造的核心问题。介绍了国内外微流控芯片模具镶块加工技术的发展状况,分析了各种加工技术的适用范围与发展前景。研究表明,微流控芯片模具镶块制造技术对精密注射成型技术的发展具有一定的推动作用。
|
| 关 键 词： | 微流控芯片 微模具镶块 微制造 微细加工技术 |
Progress in key technology of fabricating mould for polymer micro-fluidic chip |
| |
| SONG Man-cang , YU Chao , ZHANG Jian-lei , ZHOU Fei , XIE Ting-li. Progress in key technology of fabricating mould for polymer micro-fluidic chip[J]. Die & Mould Industry, 2012, 38(2): 1-6 |
| |
| Authors: | SONG Man-cang YU Chao ZHANG Jian-lei ZHOU Fei XIE Ting-li |
| |
| Affiliation: | 1.Engineering Research Center for Molding Product of Ministry of Education, Dalian University of Technology, Dalian, Liaoning 116023, China; 2.MITSUBISH-DUT Electrical Discharge Machinin Technology Center, Dalian, Liaoning 116023, China) |
| |
| Abstract: | The processing of microchannel cavity-molding insert is a core issue in the manufacturing of mould for polymer micro-fluidic chip. A brief introduction of the development of the processing technique for polymer microfluidic chips was made; and meanwhile the application and prospect of various processing techniques were investigated. |
| |
| Keywords: | micro-fluidic chip micro mold insert micro-manufacturing micromachining technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
