A Black Phosphate Conversion Coating on Steel Surface Using Antimony(III)-Tartrate as an Additive |
| |
| Authors: | Feng Li Guiping Wang |
| |
| Affiliation: | 1.Department of Chemistry, Normal College,ShenYang University,Shenyang,China;2.School of Equipment Engineering,Shenyang Ligong University,Shenyang,China |
| |
| Abstract: | A novel black phosphate conversion coating was formed on steel surface through a Zn-Mn phosphating bath containing mainly ZnO, H3PO4, Mn(H2PO4)2, and Ca(NO3)2, where antimony(III)-tartrate was used as the blackening agent of phosphatization. The surface morphology and composition of the coating were characterized by scanning electron microscopy, energy dispersion spectroscopy, and x-ray photoelectron spectroscopy. Corrosion resistance of the coating was studied by potentiodynamic polarization curves and electrochemical impedance spectroscopy. The pH value of the solution had significant influence on the formation and corrosion resistance of the coating. The experimental results indicated that the Sb plays a vital role in the blackening of phosphate conversion coating. The optimal concentration of antimony(III)-tartrate in the phosphating bath used in this experiment was 1.0 g L?1, as higher values reduced the corrosion resistance of the coating. In addition, by saponification and oil seals, the corrosion duration of the black phosphate coating in a copper sulfate spot test can be as long as 20 min. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
